40 GHz 2.92mm Male to 2.92mm Male .118 Semi-Rigid Cable Assembly eP7078R-L

eP7078R-L Stock lengths:


6″= eP7078R-06


9″= eP7078R-09


12″= eP7078R-12


18″= eP7078R-18



For cable lengths >72 inches, please contact evissaP for pricing.


For non-stock lengths, delivery is 2-3 weeks ARO




To display price, please select quantity and length below.

This product is currently out of stock and unavailable.


  • Description


40 GHz 2.92mm Male to 2.92mm Male .118 Semi-Rigid Cable Assembly eP7078R-L

The all new evissaP eP-Semi-Rigid series, offers higher Vp (velocity of propagation) resulting in shorter signal delays in RF/Microwave systems, very low VSWR, lower loss than RG405 & RG405 special low loss cables and have extraordinary shield effectiveness of > 165 dB working from 500 MHz to 40 GHz. The eP7078R-L semi-rigid cable assemblies are typically used in ground and airborne systems, satellite and terrestrial wireless communication systems, as well as electronic equipment, electronic warfare and microwave antennas.

evissaP offers its eP7078R-L 2.92mm Male to 2.92mm Male RF semi-rigid cable assemblies in 0.1” length increments.  Overall RF cable length is defined by the “-L” Part Number (PN) suffix.  For instance, the eP7078R-L PN for a 12.5” long RF cable assembly would be eP7078R-12.5.  All eP7078R-L 2.92mm Male to 2.92mm Male RF semi-rigid cable assemblies are 100% tested for VSWR over its specified frequency range.  Special testing, bending and custom labeling are also available. The eP7078R-L cable assemblies are available in 28 days or less ARO.

evissaP offers its eP-semi-rigid RF cable assemblies in a variety of connector interfaces, connector configurations, cable diameters and outer jacket options.

evissap RF cables category includes many different cable types, all of which are RoHS compliant. Our coaxial RF cable is designed to precise RF industry specifications. evissap coaxial RF cable can be ordered in 50 Ohm and 75 Ohm impedances. Coaxial RF cable can be purchased with single or double shielding.

RF coax cables are built in low loss and standard performance versions, ranging in size from 0.020 to 0.750 inches in diameter. evissap RF cables in coax designs, may be available in corrugated, flexible, formable or semi-rigid versions. Size and construction materials of the coaxial RF cable determine flexibility and bend radius; some cables have a minimum one time bend radius. A variety of core dielectric materials including AIR/FEP, FEP or PTFE versions result in a wide range of performance characteristics. Our coax RF cables are designed to handle a wide range of performance criteria including attenuation, temperature, voltage, and RF power.

Coax types for evissap RF cables include: RG108/U, RG11/U, RG122/U, RG141/U, RG142/U, RG174/U, RG178/U, RG179/U, RG180/U, RG187/U, RG188/U, RG188-DS, RG196/U, RG213/U, RG214/U, RG216/U, RG217/U, RG218/U, RG219/U, RG223/U, RG225/U, RG302/U, RG303/U, RG316/U, RG316-DS, RG393/U, RG400/U, RG401/U, RG402/U, RG405/U, RG55/U, RG58/U, RG58-P, RG59/U, RG59-P, RG62/U, RG6/U, RG6-CATV, RG71/U, RG8/U, RG8X and evissap specific RF cable.


Frequency Range - GHz: 0.5-40.0
Max VSWR: 1.25:1
Impedance: (ohms) 50
Typical Vel. of Propagation: >80%
Bulk cable specifications:
Cable Type:
  • .118" eP-Semi Rigid
Cable outer diameter:
  • .118" nominal
Inner conductor/finish
  • Silver-plated copper clad steel
  • Create Part Number (PN) by adding length to PN suffix.
  • Determine price by using Length/Qty. pull-down menus.
  • Make sure total PN price exceeds the $200 per PN minimum.
  • For delivery, please enter 21 days or sooner on your Purchase Order (P.O.)
  • Submit P.O. to [email protected] or fax to 408.943.8268
  • Your P.O. should be confirmed within 24 hours from receipt.
  • If first time buyer, credit card payment is accepted.
  • evissaP Warranty and Terms and Conditions apply.

Thank you, we appreciate your business.

Do NOT follow this link or you will be banned from the site!